Your cart is empty

LEIFELD Mounts

LEIFELD MultiMountLEIFELD MultiMount

The LEIFELD MultiMount provides an easy method of mounting wall-angles at the standard sanitary dimensions of: 80, 100, 120, 153 or 160 mm (also angled at 45 degrees) on one single Mount, complete with pre-stamped datum marks on both sides.

Similar products for use in drywall constructions are the LEIFELD Mounting Blocks and the LEIFELD UniBlock.

By the way, if you need a larger production run of bespoke brackets or supports, read this page - Bespoke Production

 

MultihalterAnimation


Available as:
    - Part# 1250 has a mounting height/depth of 50 mm
    - Part# 1251 has a mounting height/depth of 33 mm
    - Part# 1230 is flat

 

 

Advantages
  • use for either Wall installation or flush-mounting
  • suitable for all wall-elbows with 40 mm centers
  • with holes to secure a waste pipe using the LEIFELD Cable-Clamp
  • complete with pre-stamped datum marks on both sides

Order - LEIFELD MultiMount    Order - LEIFELD MultiMount

Usage - LEIFELD MultiMount    Usage - LEIFELD MultiMount

Order - LEIFELD Cable Clamp    Order - LEIFELD Cable Clamp

Usage - LEIFELD Cable Clamp    Usage - LEIFELD Cable Clamp

Film - Fitting wall plate elbows to the MultiMount    Film - Fitting wall plate elbows to the MultiMount

Technical Data Sheet - download    Technical Data Sheet - download


LEIFELD SaniMount
LEIFELD SaniMount

The LEIFELD SaniMounts have a mounting height/depth of 33 mm and are pre-drilled and threaded to accept M5 screws. Wall elbow valves can be rotated in steps of 22,5 degrees.

Available as:

 
Centres
50 mm deep
33 mm deep
   flat   
Screws
 153 mm
 Part.# 1714
 Part.# 1700
 Part.# 1728
 Part.# 1034
 120 mm
 Part.# 1715
 Part.# 1701
 Part.# 1729
 Part.# 1034
 100 mm
 Part.# 1716
 Part.# 1702
 Part.# 1730
 Part.# 1034
 80 mm
 Part.# 1717
 Part.# 1703
 Part.# 1731
 Part.# 1034
 UniHalter
 Part.# 1727
 Part.# 1726
 -
 Part.# 1034
 JRG-Sanipex
 Part.# 1732
 -
 Part.# 1733
 Part.# 1046
 
Advantages
  • fit wall-elbows either in front of or in the wall
  • suitable for all wall-elbows with 40 mm centers
  • with holes to secure a waste pipe using the LEIFELD Cable-Clamp
  • pre-drilled and threaded to accept M5 screws

Order - LEIFELD SaniMount    Order - LEIFELD SaniMount

Usage - LEIFELD SaniMount    Usage - LEIFELD SaniMount

Order - LEIFELD Cable Clamp    Order - LEIFELD Cable Clamp

Usage - LEIFELD Cable Clamp    Usage - LEIFELD Cable Clamp

Film - Fitting wall plate elbows to the SaniMount    Film - Fitting wall plate elbows to the SaniMount

Technical Data Sheet - download    Technical Data Sheet - download

Technical Data Sheet JRG - download    Technical Data Sheet JRG - download


Back to top